ONCO CARE KIT

ONCO CARE KIT

Features

• Secondary Filter: 0.2 µ to Retain Bacteria/ Fungi And To Remove Entrapped Air.
• Disk Filter: To Eliminate Any Particulate Matter & Entrapped Air Bubble
• Contains No Latex
• Y-Injection Site
• DEHP Free Tube
• Luer Lock

Instruction for Use

1.      Close The Flow Regulator & Remove the Protective Cap Of Spike.

2.      Flush The Filter Keeping In Vertical Position Wikth Saline. Keep Air Vent In Closed Position During Flushing.

3.      Use I.V. Set Immediately After Priming Thrust The Piercing Device Straight Through Rubber Stopper Of Bottle.

4.      Check Vacuum Status By Observing The Rising Bubbles.

5.      Open Flow Regulator And Fill Drip Chamber To The Half/Mark.

6.      Remove Protective Cap Of The Male Conical Fitting Open The Roller Clamp And Fill Tubing With Solution.

7.      Remove The Air Bubbles In PVC Tube And Close Flow Regulator.

8.      Perform Venipuncture And Adjust The Flow Regulator Properly To Regulate Flow And Connect The Male Conical Fitting/ Connect To Venipuncture Devices.

Order Information